This product is a new type of waterproof material that has emerged in developed countries such as Europe, America, Japan, and South Korea in recent years. It is a two-component water-based building waterproof coating made from polymer emulsion and special cement as the main raw materials, with the addition of other admixtures. Therefore, it has the waterproof characteristics of "combining rigidity and flexibility".
| Serial Number | Test Item | Technical Indicators | ||
|---|---|---|---|---|
| Type Ⅰ | Type Ⅱ | Type Ⅲ | ||
| 1 | Solid Content (%) ≥ | 70 | 70 | 70 |
| 2 | Without Treatment (Mpa) ≥ | 1.2 | 1.8 | 1.8 |
| Retention Rate after Heat Treatment (%) ≥ | 80 | 80 | 80 | |
| Retention Rate after Alkali Treatment (%) ≥ | 60 | 70 | 70 | |
| Retention Rate after Water Immersion Treatment (%) ≥ | 60 | 70 | 70 | |
| Retention Rate after UV Treatment (%) ≥ | 80 | - | - | |
| 3 | Without Treatment (%) ≥ | 200 | 80 | 30 |
| After Heat Treatment (%) ≥ | 150 | 65 | 20 | |
| After Alkali Treatment (%) ≥ | 150 | 65 | 20 | |
| After Water Immersion Treatment (%) ≥ | 150 | 65 | 20 | |
| After UV Treatment (%) ≥ | 150 | - | - | |
| 4 | Low-Temperature Flexibility (Φ10mm Rod) | No Cracks at -10℃ | - | - |
| 5 | Without Treatment (Mpa) ≥ | 0.5 | 0.7 | 1.0 |
| Damp Base Layer (Mpa) ≥ | 0.5 | 0.7 | 1.0 | |
| After Alkali Treatment (Mpa) ≥ | 0.5 | 0.7 | 1.0 | |
| After Water Immersion Treatment (Mpa) ≥ | 0.5 | 0.7 | 1.0 | |
| 6 | Water Impermeability (0.3Mpa, 30min) ≥ | Impermeable | Impermeable | Impermeable |
| 7 | Impermeability (Mortar Back Surface) (Mpa) ≥ | - | 0.6 | 0.8 |